|
The Ugly's Reference book is a must have for
all electricians.I have 3.One is in my tool
bag,one for my breifcase and one for my
desk.For more information:
UGLY's Electrical References, 2008
Edition
|
|
The Fluke T5-1000 can be used
for testing voltage,amperage and resistance.The
only downside of this unit is that you can only
checl amperage on wire sizes to 1/0.A great +
to this unit is that it has a hold feature that
allows you to do your test,hit the hold button
to see your readings if you have a hard to
reach and read area.For more information:
Fluke T5-1000
|
|
The Fluke LVD1 is handy for a
quick test to check if voltage is present.It
will not give you information needed when
troubleshooting.It has a led light on it which
comes in handy in dark areas.For more
information:
Fluke Volt light LVD1 |
|
The GFCI tester shown is a
great tool to check polarity,correct wiring to
the device and a test button for GFCIs.It has a
lable on it to explain what is wrong or if
everything is correct.It will not give you a
voltage reading.For mor information:
GFCI-Outlet Tester |
|
This Greenlee vlotage tester does
the same job as the Fluke LVD1.Use caution when
using both of these testers.A volt meter should
be used to determine actual voltage.For more
information:
Non-Contact Adjustable Voltage Detector By Greenlee
Textron |
|
There are several types of wire strippers on
the market.These strippers happen to have a
voltage alert tester built into them which is
detachable.Pretty cool tool,2 in 1.
For more information:
Gb Circuit Alert Wire Stripper (GST-224)
|
|
|